Our range of spare parts and accessories to suit Off Road Drift II Go Karts and Bulldog Go Karts. A variety of parts for many models of Go Karts
Air Filter Cartridge 6.5hp Engine
$25.00
Air Filter cartridge for the 6.5hp 196cc engine for all Off Road Drift Go Karts. This is a replacement cartridge and can easily be installed
Air Filter Cartridge 9 hp engine
$25.00
Air Filter cartridge for the 9 hp 270 cc engine for all Off Road Drift Go Karts. This is a replacement cartridge and can easily be installed
Air Filter Housing
$20.00
Air Filter housing for 6.5 hp 196 cc and 5.5 hp 168 cc Engines run on all Off Road Drift Go Karts. Does not include air filter cartridge. These can be easily installed at home. Made of black plastic
Cable Throttle Accelerator Bulldog Foot Control
$30.00
Throttle Accelerator cable for the Bulldog Go Cart Foot Control
Approximate length 220 cm Outer Cable
Cable Throttle Accelerator Drift II Kart
$25.00
Throttle Accelerator cable for the butterfly steering wheel Go Cart
Approximate length 180 cm Outer Cable
For Drift II Go Karts
Cap fuel Plastic Screw on
$15.00
Fuel cap petrol resistant plastic screw thread type
Carburetor 6.5 hp Engine
$45.00
Carbie to suit both 6.5 hp engines. Non adjustable fuel mixture screw Easily replaced at home
Does not come with engine gasket
Carburetor 9 HP Engine
$49.00
Carbie to suit both 9 hp engines. Non adjustable fuel mixture screw Easily replaced at home
Does not come with engine gasket
Chain Drive Roller Chain for 6.5 hp Engine
$35.00
Chain drive for 6.5 hp go carts
approx. 30 links 760 mm total length 41 Pitch
Chain Pitch Centre Pin 12.45 mm
Roller diameter 7.66 mm
Roller width 6.64 mm
Pin Thickness 3.93 mm
Side Bar Thickness 10.21 mm
Side Bar Thickness 1.45 mm
Clutch Dry Centrifigal
$59.00
Centrifugal Dry Clutch 10 tooth sprocket, fits a 19 mm shaft, diameter 110 mm, Length of centre shaft bush 59 mm and the internal clutch springs can be replaced
- CLC3512.jpg (7.36 KiB) Viewed 2123 times
- The friction material & arrestor spring(s)
- InnerB.jpg (6.68 KiB) Viewed 2122 times
- The transmission plate & central shaft. (central shaft not shown. Picture below shows friction material and spring installed)
- Inner.jpg (15.72 KiB) Viewed 2122 times
In the picture above you can see the friction material installed onto the transmission plate. You can see the transmission plate splines in the centre of the plate. The central shaft (not shown) slots into these splines and slides onto the crankshaft of the engine. It rotates with the engine because it is keyed and the key slots into the keyway on the crankshaft.
The drum sits over this material and is large enough so that the material does not contact the drum when it is fitted. You can rotate the drum freely when the unit is assembled as the friction material does not contact the drum.
As the speed of the crankshaft rotation increases (RPM increases) there is more and more centrifugal force on the friction material.
The spring holds them together in a tight circle and they do not touch the drum.
As the force pushing the friction material away from the centre increases to a point that it is greater than the force applied by the spring, the friction material starts to move outwards and contacts with the drum.
This begins to happen somewhere between 1500rpm and 1800rpm on the standard DRY CLUTCHES. At this point, the drum is still slipping on the friction material because the amount of force is not great enough to overcome the friction from the back wheels. The more weight, the more friction. When the drum slips, it creates heat. This is the biggest CON for the Dry Centrifugal Clutch.
NOTE: DRY CLUTCHES SHOULD NOT BE IDLED!
ONE MORE IMPORTANT THING TO NOTE IS THAT AFTER THE FIRST USE, SOME HEAT WILL INEVITABLY BE TRANSFERRED TO THE SPRING AND IT WILL STRETCH SLIGHTLY. FROM THIS POINT ON, AT IDLE, THE CLUTCH WILL SLOWLY BEGIN TO ENGAGE AT IDLE SPEED - THE HIGHER THE IDLE SPEED, THE MORE THE ENGAGEMENT WHICH WILL ACCELERATE WEAR.
At 2000rpm the friction material has so much centrifugal force applied to it that the spring can no longer arrest the material and it completely contacts the drum. This is considered it's FULLY ENGAGED rpm. Power is now transmitted directly through the chain to the rear drive sprocket and no further heat is created.
Clutch Spring
$15.00
Replacement centrifugal clutch spring
With the right tools it is easy to replace the spring in the clutch
Engine 6.5 hp 196 cc with Wet Clutch
$359.00
Engine 6.5 hp 196 cc with Wet Clutch
Pull Start, Unleaded fuel, 4 stroke,
Dimensions (L x W x H) 37 cm x 31.5 cm x 33 cm approx Bore x Stroke 68 mm x 54 mm Shaft Length x Diameter 45.5 x 19.05 mm Keyway Size 4.78 x 16.36 mm Mounting Hole Dimensions (Diameter) M8 x 20 mm Compression Ratio 8.5:1 Max Power Output 4.8 KW Max Torque 10.8N.m/2500 rpm Type Single-Cylinder, 4-Stroke Displacement 196 cc, 2.1 Reduction Gearbox Unleaded Fuel, Tank 3.6 L Package Dimensions (L x W x H) 38 cm x 33 cm x 34 cm approx Package Weight 20 kg approx.
Please contact me for a freight quote on 0402229355 or info@gocartsaustralia.com.au or the item can be collected from my store
Engine 6.5HP 196cc
$259.00
Engine 6.5 horse power 196 cc. Pull Start, Unleaded fuel, 4 stroke,
Dimensions (L x W x H) 37 cm x 31.5 cm x 33 cm approx. Bore x Stroke 68 mm x 54 mm Shaft Length x Diameter 45.5 x 19.05 mm Keyway Size 4.78 x 16.36 mm Mounting Hole Dimensions (Diameter) M8 x 20 mm Compression Ratio 8.5:1 Max Power Output 4.8 KW Max Torque 10.8N.m/2500 rpm Type Single-Cylinder, 4-Stroke Displacement 196 cc Fuel Gasoline Fuel Tank 3.6L Package Dimensions (L x W x H) 38 cm x 32.5 cm x 34 cm approx. Package Weight 16 kg approx.
Please contact me for a freight quote at info@gocartsaustralia.com.au or text 0402229355 or the item can be collected from my store
Engine 9 hp 270 cc with Wet Clutch
$550.00
Engine 9hp 270 cc with Wet Clutch
Pull Start, Unleaded fuel, 4 stroke,
.
Please contact me for a freight quote on 0402229355 or info@gocartsaustralia.com.au or the item can be collected from our store on the Sunshine Coast QLD
Engine Electric Start 6.5HP 196cc
$349.00
Engine 6.5 horse power 196 cc. Electric Start, Unleaded fuel, 4 stroke,
Dimensions (L x W x H) 37 cm x 31.5 cm x 33 cm approx. Bore x Stroke 68 mm x 54 mm Shaft Length x Diameter 45.5 x 19.05 mm Keyway Size 4.78 x 16.36 mm Mounting Hole Dimensions (Diameter) M8 x 20 mm Compression Ratio 8.5:1 Max Power Output 4.8 KW Max Torque 10.8N.m/2500 rpm Type Single-Cylinder, 4-Stroke Displacement 196 cc Fuel Gasoline Fuel Tank 3.6L Package Dimensions (L x W x H) 38 cm x 32.5 cm x 34 cm approx. Package Weight 16 kg approx.
Please contact me for a freight quote at info@gocartsaustralia.com.au or text 0402229355 or the item can be collected from my store
Exhaust & Muffler Upgrade racing
$230.00
Exhaust Muffler to suit 6.5 hp and 5.5 hp Engine for Drift II Go Kart, Bulldog and Black Thunder Go Karts
This is a Performance Upgrade and can increase HP up to around 9HP
Exhaust Muffler
$30.00
Exhaust Muffler to suit 6.5 hp and 5.5 hp Engine for Drift II Go Kart, Bulldog and Thunder Go Karts
Exhaust Muffler
$50.00
Exhaust Muffler to suit 6.5 hp and 5.5 hp Engine for Drift II Go Kart, Bulldog and Thunder Go Karts
Frame Rear Swing Arm for model GK200
Sold Out
Rear swing arm engine frame mount for Off Road Drift II Go Kart
To suit Model GK200
Dimensions Inner distance between swing arm connection arms to chassis is 420 mm
Please contact me for a freight quote 0402229355 or info@gocartsaustralia.com.au or the item can be collected from my store
Frame Rear Swing Arm for model GK270N
$140.00
Rear swing arm engine frame mount for Off Road Drift II Go Kart
To suit Model GK270N
Dimensions Inner distance between swing arm connection arms to chassis is 420 mm
Please contact me for a freight quote 0402229355 or info@gocartsaustralia.com.au or the item can be collected from my store
Go Kart Drift II 6.5 hp 196 cc BLACK with EPA engine
$1,099.00
GO KART
Note this is for a BLACK coloured Go Kart with latest EPA engine
The standard but most popular Go Kart. Great for the kids yet the adults can still jump on and have a go. It has a 6.5 hp 196 cc 4 stroke engine with pull start. It has a centrifugal clutch, uses unleaded fuel and has a top speed of approx. 35 to 45 kph. This model has hydraulic disc brakes and a butterfly steering wheel with lever throttle and brake controls. The engines can be governed to reduce the top speed if required
Please contact me for a freight quote at info@gocartsaustralia.com.au or the cart can be collected from my store or text your post code and suburb to 0402229355
Box Dimensions 85 kg 110 cm x 98 cm x 53 cm
Go Kart Drift II 6.5 hp 196 cc BLACK with TORQUE CONVERTER
$1,299.00
GO KART
Note this is for a BLACK coloured Go Kart with latest EPA engine
The standard but most popular Go Kart. Great for the kids yet the adults can still jump on and have a go. It has a 6.5 hp 196 cc 4 stroke engine with pull start. It has a TORQUE CONVERTER, uses unleaded fuel and has a top speed of approx. 35 to 45 kph. This model has hydraulic disc brakes and a butterfly steering wheel with lever throttle and brake controls. The engines can be governed to reduce the top speed if required. This model is ideal for the younger children, allowing slower speeds without over heating the clutch
Please contact me for a freight quote at info@gocartsaustralia.com.au or the cart can be collected from my store or text your post code and suburb to 0402229355
Box Dimensions 85 kg 110 cm x 98 cm x 53 cm
Go Kart Drift II 6.5 hp 196 cc BLUE with new EPA engine
$1,099.00
BLUE GO KART
Note this is for a BLUE Go Kart with latest EPA engine
The standard but most popular Go Kart. Great for the kids yet the adults can still jump on and have a go. It has a 6.5 hp 196 cc 4 stroke engine with pull start. It has a dry centrifugal clutch, uses unleaded fuel and has a top speed of approx. 35 to 45 km. This model has hydraulic disc brakes and a butterfly steering wheel with lever throttle and brake controls. The engines can be governed to reduce the top speed if required
Please contact me for a freight quote on 0402229355 or info@gocartsaustralia.com.au or the cart can be collected from my store
Box Dimensions 85 kg 110 cm x 98 cm x 53 cm
Go Kart Drift II 6.5 hp 196 cc BLUE with TORQUE CONVERTER
$1,299.00
BLUE GO KART
The standard but most popular Go Kart. Great for the kids yet the adults can still jump on and have a go. It has a 6.5 Hp 196 cc 4 stroke engine with pull start. It has a TORQUE CONVERTER, uses unleaded fuel and has a top speed of approx. 35 km. This model has hydraulic disc brakes and a butterfly steering wheel with lever throttle and brake controls. The engines can be governed to reduce the top speed if required. This model is ideal for the younger children, allowing slower speeds without over heating the clutch
Please contact me for a freight quote on 0402229355 or info@gocartsaustralia.com.au or the cart can be collected from my store
Box Dimensions 85 kg 110 cm x 98 cm x 53 cm
Go Kart Drift II 6.5 hp 196 cc RED with new EPA engine
Sold Out
RED GO KART
Note this is for a RED coloured Go Kart with latest EPA engine
The standard but most popular Go Kart. Great for the kids yet the adults can still jump on and have a go. It has a 6.5 hp 196 cc 4 stroke engine with pull start. It has a dry centrifugal clutch, uses unleaded fuel and has a top speed of approx. 35 to 45 km. This model has hydraulic disc brakes and a butterfly steering wheel with lever throttle and brake controls. The engines can be governed to reduce the top speed if required
Please contact me for a freight quote on 0402229355 or info@gocartsaustralia.com.au or the cart can be collected from my store
Box Dimensions 85 kg 110 cm x 98 cm x 53 cm
Go Kart Drift II 6.5 hp 196 cc RED with TORQUE CONVERTER
$1,299.00
RED GO KART
Go Kart with latest EPA engine & torque Converter
The standard but most popular Go Kart. Great for the kids yet the adults can still jump on and have a go. It has a 6.5 hp 196 cc 4 stroke engine with pull start. It has a TORQUE CONVERTER, uses unleaded fuel and has a top speed of approx. 35 to 45 km. This model has hydraulic disc brakes and a butterfly steering wheel with lever throttle and brake controls. The engine can be governed to reduce the top speed if required. This model is ideal for the younger children, allowing slower speeds without over heating the clutch
Please contact me for a freight quote on 0402229355 or info@gocartsaustralia.com.au or the cart can be collected from my store
Box Dimensions 85 kg 110 cm x 98 cm x 53 cm
Kill Switch
$15.00
Engine Kill Switch for steering wheel mounting
The latest replacement kill switch is more robust and comes complete with wiring loom. length of loom approx 150cm
Pull Start 6.5hp Engine
$30.00
Pull Start to suit 6.5hp Engines
Replacement for 6.5hp Hybrid engine
Pull Start 9hp Engine
$45.00
Pull Start to suit 6.5hp Engines
Replacement for 6.5hp Hybrid engine
Spark Plug
$8.00
NGK Spark Plug BPR5ES
preferred spark plug for these Go Carts
Steering Column Shaft Long for Bulldog Karts
$59.00
Steering Shaft Column to suit Off Road Drift II, Bulldog and Thunder Go Karts or karts with extention frames
Approx. length 730mm
Steering Column Shaft short for Drift II Karts
$49.00
Steering Shaft Column to suit Off Road Drift II, Bulldog and Thunder Go Karts
Approx. length 530mm
Stub Axle Front Right 15mm
$30.00
Front right hand stub axle. The right hand side is from sitting in the drivers seat.
Shaft Length 80mm Shaft diameter 15mm
Bearing 6001RS1
Does not include Wheel nut
Stub Axle Front Right SH 17mm
$30.00
Front right hand stub axle. The right hand side is from sitting in the drivers seat.
Shaft Length 68mm Shaft diameter 17mm
Bearing 6001RS1
Does not include Wheel nut