Our range of spare parts and accessories to suit Off Road Drift II Go Karts. A variety of parts for many models of Go Karts
$20.00
Air Filter housing for 6.5 hp 196 cc and 5.5 hp 168 cc Engines run on all Off Road Drift Go Karts. Does not include air filter cartridge. These can be easily installed at home. Made of black plastic$95.00
Staggered Spline rear axle for models GK200, GK200N, GK270N
Length 870 mm and Shaft Diameter is 27 mm Bearing seat to end of axle 165 mm Inner Spline Length 33 mm (118 mm from end of axle) Thread length 33 mm (85 mm from end of axle) Outer Spline length 32 mm (24 mm from end of axle) Thread length at end of axle 25 mm.
Thread 22 mm 1.5 p metric fine
Please contact me for a freight quote at info@gocartsaustralia.com.au or the item can be collected from my store
$115.00
Rear Drive Axle for Off Road Drift II Go Cart
Suits Models suffix LW
Axle Length 850 mm Bearing seat distance 145 mm from Axle end, Spline of axle length 90 mm (Axle thread at 26 mm from end of axle)
Please contact me for a freight quote at info@gocartsaustralia.com.au or the item can be collected from my store
$95.00
Rear Axle with keyway on drive side and spline on the brake side
Rear drive axle to suit models Drift II 6.5 hp 196 cc and Bulldog 270 cc 9 hp Karts
Please contact me for a freight quote at info@gocartsaustralia.com.au 0402229355 or the item can be collected from our store
$15.00
Rear Axle Bearings to suit Off Road Go Kart
Model older model
Sold Out
Rear Axle Bearings to suit Off Road Go Cart
Model GK200 GK200N & GK270N
Bearing 6205RS
Sold Out
Front Stub Axle Bearings to suit Off Road Go Cart
Model GK200 or GK200N or GK270N
Diameter 35 mm x 10 mm Centre 13 mm
Bearing 6003RS
$40.00
Please note these are in stock
Text 0402229355 if you have problems ordering
Cable Brake Caliper for Drift II Off Road Go Carts to suit these style brake pads
Distance between mounting bracket holes centre to centre is 52mm
Please note hydraulic calipers are NOT a straight forward replacement for these brake Calipers
$99.00
Hydraulic Disc Brake assembly complete with caliper, hose and foot pedal leverage bracket for attachment to pedal control on Go Karts. Designed to increase brake capacity on all Off Road Drift Go Karts. The brake pads contain no asbestos and can be easily replaced when required. Length of hydraulic hose approx. 120 cm from foot pedal to caliper.
$35.00
Brake Rotor for Hydraulic Disc brakes
Diameter 160 mm 6 stud hole pattern Centre hole 39 mm Stud holes 25 mm apart centre to centre 3 mm thickness
$40.00
Brake Rotor for Hydraulic Disc brakes
Diameter 160 mm 6 stud hole pattern Centre hole 33 mm . Stud holes 22 mm apart centre to centre 2 mm thickness
$39.00
Front left hand Drum Brakes for Early Drift II Models. It comes complete with brake shoes and I do stock replacement brake shoes. Made from cast iron these are a well constructed unitSold Out
$89.00
Front Bumper Assemble. Attaches to most Off Road Drift II Go Carts. Easily to install
Distance between attachment Brackets centre to centre is.approx 245 mm..
Black Only
Please contact me for a freight quote 0402229355 or info@gocartsaustralia.com.au or the item can be collected from my store
$10.00
Rear swing arm bush
43 mm long with a 10 mm centre hole
$20.00
Brake Cable for butterfly steering wheel and standard brake calipers. This consists of an inner and outer cable
Approx. length of outer cable 120 cm
$39.00
Chain for the Bulldog 9 hp Engine
Length 900 mm
Chain Pitch Centre Pin 12.49 mm
Roller diameter 8.37 mm
Roller width 8 mm
Pin Thickness 4. mm
Side Bar width 10.53
Side Bar Thickness 1.58 mm
Sold Out
Front Brush Frame with lugs to attach Roll Cage
Distance between mounting bolts Centre to Centre is 250 mm
Not all colours held in stock so please request the colour and we will endeavor to supply it
Please contact me for a freight quote 0402229355 or info@gocartsaustralia.com.au or the item can be collected from my store
$90.00
Front Brush Frame for the standard Drift II without roll cage This frame does not include lugs for roll cage
Distance between mounting bolts Centre to Centre is 250 mm
Colours will vary. We do not always carry every colour so please request the colour and we will endeavor to supply the colour of your choice
Please contact me for a freight quote 0402229355 or info@gocartsaustralia.com.au or the item can be collected from my store
$120.00
Rear swing arm engine frame mount for Off Road Drift II Go Kart
To suit Model LWGK-50A
Dimensions Inner distance between swing arm connection arms to chassis
Please contact me for a freight quote 0402229355 or info@gocartsaustralia.com.au or the item can be collected from my store
$120.00
Rear swing arm engine frame mount for Off Road Drift II Go Kart
To suit Model GK200
Dimensions Inner distance between swing arm connection arms to chassis is 420 mm
Please contact me for a freight quote 0402229355 or info@gocartsaustralia.com.au or the item can be collected from my store
$130.00
Rear swing arm engine frame mount for Off Road Drift II Go Kart
To suit Model GK270N
Dimensions Inner distance between swing arm connection arms to chassis is 420 mm
Please contact me for a freight quote 0402229355 or info@gocartsaustralia.com.au or the item can be collected from my store
$1,650.00
The BULLDOG 270 cc 9 hp BLACK
Note this for a BLACK coloured Go Kart with latest EPA engine
270cc 9 horse power 4 stroke engine with wet clutch, Hydraulic Disc brakes, Foot pedal controls, Front independent suspension with air shock absorbers, 7 inch tubeless tyres all round, 3 point Harness seat belt, Chain drive, Maximum speed approx. 55 klms the engine can be governed to reduce top speed. GK270N This kart comes with the extension frame which gives an approx extra 140 mm extra leg room Please contact me for a freight Quote at 0402229355 or info@gocartsaustralia.com.au or the Kart can be collected from our Store
The box dimensions are 120 cm x 98 cm x 62 cm 120 kg
Dimensions assembled 200 cm L x 99 cm W x 85 cm H
$1,650.00
The BULLDOG 270 cc 9 hp RED with latest EPA engine
Note this for a RED coloured Go Kart
270 cc 9 horse power 4 stroke engine with wet clutch, Hydraulic Disc brakes, Foot pedal controls, Front independent suspension with air shock absorbers, 7 inch tubeless tyres all round, 3 point Harness seat belt, Chain drive, Maximum speed approx. 55 klm the engine can be governed to reduce top speed. GK270N This kart comes with the extension frame which gives an approx extra 140 mm extra leg room Please contact me for a freight Quote at 0402229355 or info@gocartsaustralia.com.au or the Kart can be collected from our Store
The box dimensions are 120 cm x 98 cm x 62 cm 120 kg
Dimensions assembled 200 cm L x 99 cm W x 85 cm H
$1,650.00
The BULLDOG 270 cc 9 hp BLUE with Extension Frame
Note this is for a BLUE coloured Go Kart
270 cc 9 horse power 4 stroke engine with wet clutch, Hydraulic Disc brakes, Foot pedal controls, Front independent suspension with air shock absorbers, 7 inch tubeless tyres all round, 3 point Harness seat belt, Chain drive, Maximum speed approx. 55 klm the engine can be governed to reduce top speed. GK270N. This kart comes with the Extension frame which gives an extra 140 mm extra leg room Please contact me for a freight Quote at 0402229355 or info@gocartsaustralia.com.au or the Kart can be collected from our Store
The box dimensions are 120 cm x 98 cm x 62 cm 120 kg
$950.00
GO KART
Note this is for a BLACK coloured Go Kart with latest EPA engine
The standard but most popular Go Kart. Great for the kids yet the adults can still jump on and have a go. It has a 6.5 hp 196 cc 4 stroke engine with pull start. It has a centrifugal clutch, uses unleaded fuel and has a top speed of approx. 35 to 45 kph. This model has hydraulic disc brakes and a butterfly steering wheel with lever throttle and brake controls. The engines can be governed to reduce the top speed if required
Please contact me for a freight quote at info@gocartsaustralia.com.au or the cart can be collected from my store or text your post code and suburb to 0402229355
Box Dimensions 85 kg 110 cm x 98 cm x 53 cm
$1,199.00
GO KART
Note this is for a BLACK coloured Go Kart with latest EPA engine
The standard but most popular Go Kart. Great for the kids yet the adults can still jump on and have a go. It has a 6.5 hp 196 cc 4 stroke engine with pull start. It has a TORQUE CONVERTER, uses unleaded fuel and has a top speed of approx. 35 to 45 kph. This model has hydraulic disc brakes and a butterfly steering wheel with lever throttle and brake controls. The engines can be governed to reduce the top speed if required. This model is ideal for the younger children, allowing slower speeds without over heating the clutch
Please contact me for a freight quote at info@gocartsaustralia.com.au or the cart can be collected from my store or text your post code and suburb to 0402229355
Box Dimensions 85 kg 110 cm x 98 cm x 53 cm
$950.00
BLUE GO KART
Note this is for a BLUE Go Kart with latest EPA engine
The standard but most popular Go Kart. Great for the kids yet the adults can still jump on and have a go. It has a 6.5 hp 196 cc 4 stroke engine with pull start. It has a dry centrifugal clutch, uses unleaded fuel and has a top speed of approx. 35 to 45 km. This model has hydraulic disc brakes and a butterfly steering wheel with lever throttle and brake controls. The engines can be governed to reduce the top speed if required
Please contact me for a freight quote on 0402229355 or info@gocartsaustralia.com.au or the cart can be collected from my store
Box Dimensions 85 kg 110 cm x 98 cm x 53 cm
$1,199.00
BLUE GO KART
Note this is for a BLUE Go Kart with latest EPA engine & torque converter
The standard but most popular Go Kart. Great for the kids yet the adults can still jump on and have a go. It has a 6.5 hp 196 cc 4 stroke engine with pull start. It has a TORQUE CONVERTER, uses unleaded fuel and has a top speed of approx. 35 kms. This model has hydraulic disc brakes and a butterfly steering wheel with lever throttle and brake controls. The engines can be governed to reduce the top speed if required. This model is ideal for the younger children, allowing slower speeds without over heating the clutch
Please contact me for a freight quote on 0402229355 or info@gocartsaustralia.com.au or the cart can be collected from my store
Box Dimensions 85 kg 110 cm x 98 cm x 53 cm
$950.00
RED GO KART
Note this is for a RED coloured Go Kart with latest EPA engine
The standard but most popular Go Kart. Great for the kids yet the adults can still jump on and have a go. It has a 6.5 hp 196 cc 4 stroke engine with pull start. It has a dry centrifugal clutch, uses unleaded fuel and has a top speed of approx. 35 to 45 km. This model has hydraulic disc brakes and a butterfly steering wheel with lever throttle and brake controls. The engines can be governed to reduce the top speed if required
Please contact me for a freight quote on 0402229355 or info@gocartsaustralia.com.au or the cart can be collected from my store
Box Dimensions 85 kg 110 cm x 98 cm x 53 cm
$1,199.00
RED GO KART
Note this is for a RED coloured Go Kart with latest EPA engine & torque Converter
The standard but most popular Go Kart. Great for the kids yet the adults can still jump on and have a go. It has a 6.5 hp 196 cc 4 stroke engine with pull start. It has a TORQUE CONVERTER, uses unleaded fuel and has a top speed of approx. 35 to 45 km. This model has hydraulic disc brakes and a butterfly steering wheel with lever throttle and brake controls. The engines can be governed to reduce the top speed if required. This model is ideal for the younger children, allowing slower speeds without over heating the clutch
Please contact me for a freight quote on 0402229355 or info@gocartsaustralia.com.au or the cart can be collected from my store
Box Dimensions 85 kg 110 cm x 98 cm x 53 cm
$15.00
Engine Kill Switch for steering wheel mounting
The latest replacement kill switch is more robust and comes complete with wiring loom. length of loom approx 150cm
$20.00
Throttle lever for the right hand side of the butterfly steering wheel$29.00
$29.00
$35.00
These Blue padded seat cover to suit all Drift Go Kart models. It is constructed of black and blue vinyl with padding to make the seats more comfortable. It has double stitching and a draw string to attach securely to plastic seat
$35.00
These Red padded seat cover to suit all Drift Go Kart models. It is constructed of black and red vinyl with padding to make the seats more comfortable. It has double stitching and a draw string to attach securely to plastic seat
$49.00
Air Shock for Bulldog Carts with front Suspension
Length 323mm 10mm bolt attachment holes
$49.00
Nitro Filled Shock Absorbers for Bulldog Karts with front Suspension
Length 323mm 10mm bolt attachment holes
$30.00
Standard adjustable Shock Absorber for the rear swing arm on Drift II Off Road Go Carts$50.00
Butterfly steering wheel for hand control Go Karts
35mm centre to centre mounting holes
$55.00
Round steering wheel for foot control Go Karts
30 cm Diameter 3 x mounting holes 37mm centre to centre
$30.00
Front left hand stub axle. The left side is from sitting in the drivers seat left hand side.
Shaft Length 80mm Shaft diameter 15mm
Bearing 6001 RS1
Does not include wheel nut
$30.00
Front left hand stub axle. The left side is from sitting in the drivers seat left hand side.
Shaft Length 68mm Shaft diameter 17mm
Bearing 6001 RS1
Does not include wheel nut
$35.00
Knobble tyre 6inch 13x5.00-6 Tubeless 4 ply